Скачать или смотреть কিভাবে ব্রেকিং এ দক্ষতা অর্জন করবেন? How to master braking? ইঞ্জিন ব্রেক engine brake @Shovan Bikers

কিভাবে ব্রেকিং এ দক্ষতা অর্জন করবেন? How to master braking? ইঞ্জিন ব্রেক engine brake @Shovan Bikers

#shovanbikers #bike #enginebrake #motovlog #ridingtips #motorcycle

Another videos
বাইক রাইডিং এ দক্ষতা অর্জনের ৮টি গোপন টিপস
   • বাইক রাইডিং এ দক্ষতা অর্জনের ৮টি গোপন টিপস...  
Bike riding preparation & Basic Technical Knowledge
   • Bike riding preparation & Basic Technical ...  


Applying engine braking on a motorcycle involves using the engine's compression and resistance to slow the bike down without relying heavily on the brakes. Here’s how you can do it safely:
1. Roll Off the Throttle
Gradually release the throttle (twist the grip forward).
This reduces the fuel supply to the engine, causing the bike to decelerate naturally.
2. Downshift Gears
Downshift sequentially to a lower gear to increase engine braking. For example:
If you're in 4th gear, shift down to 3rd, then to 2nd, and so on.
Match the engine speed (RPM) to the lower gear by slightly revving the throttle (called rev-matching) before releasing the clutch.
This helps prevent sudden jerks and wheel lock-ups.
3. Use the Clutch Gradually
Avoid pulling in the clutch fully while downshifting.
Release the clutch lever slowly after each shift to let the engine assist in braking.
If you hold the clutch fully disengaged, the engine braking effect will not occur.
Combine with Gentle Brake Use
For smoother deceleration, combine engine braking with light use of the front and rear brakes, especially when approaching stops or corners.
Tips for Safe Engine Braking
Practice in a safe area: Get comfortable with the feeling of engine braking before using it in traffic.
Stay smooth: Abrupt throttle release or aggressive downshifting can destabilize the bike.
Understand your bike: The effectiveness of engine braking depends on the bike’s engine type (e.g., a single-cylinder bike has stronger engine braking than a multi-cylinder bike).


Braking properly on a bike is crucial for safety, efficiency, and maintaining control. Here’s how to do it right:

1. Use Both Brakes
Most bikes have front and rear brakes. Use both to distribute the stopping force evenly.
The front brake provides more stopping power, but applying it too hard can cause you to go over the handlebars.
The rear brake helps with stability but doesn’t stop you as quickly as the front.
2. Brake Gradually
Squeeze the brake levers gently at first, then increase pressure as needed. Sudden braking can cause skidding or loss of control.
Avoid slamming the brakes, especially in wet or slippery conditions.
Anticipate Stops

Practice braking in a safe, open area to get a feel for how your bike responds, especially if it’s new or has a different braking system.
Would you like specific advice for certain types of bikes (e.g., road, mountain, or e-bike)?

engine brake,how to engine brake,engine braking,how to use engine brakes downhill,how do semi truck engine brakes work,how to use engine brake,how to brake on a motorcycle,jake brake,how to engine brake paddle shifters,engine brakes,jacobs engine brake,how to engine brake in an automatic car,how to engine brake using paddle shifters,how does engine braking work,how to do engine braking,how to use engine brakes in ice going downhill



ফেইসবুক
  / shovansarker.shuva  


Music credit
––––––––––––––––––––––––––––––
Pattaya by Scandinavianz / scandinavianz ​
Creative Commons — Attribution 3.0 Unported — CC BY 3.0
Free Download / Stream: https://audiolibrary.c...​
Music promoted by Audio Library • Pattaya – Scandinavian... ​
––––––––––––––––––––––––––––––