【Shinwa】Screw Pitch Marking Tool MULTI 5-pitch Switch

Screw Pitch Marking Tool MULTI for easy marking of even pitch
The distance of the pitches are uneven
Weakens the ability to withstand earthquakes and strong winds, and is very dangerous!
The Building Standard Law in Japan requires nails to be driven at regular intervals for bearing walls.

The pitches specified by each house-builder are different.
Screw Pitch Marking Tool MULTI, which can set up to 5 pitches in one unit, is convenient.
Preparation before use
Remove the cartridge and take out the ink tank.
Fill the ink tank with an appropriate amount of ink for construction.
Put the ink tank back into place.
Select the pitch on the cartridge
Select the pitch for marking with the pitch adjustment knob
Put the cartridge back.
Unlock the cartridge and roll the roller to apply the ink on the markers.
Marking a pitch
Align the marker with the starting point
Set the main block at the distance you want to mark from the edge of the board
Hold down the guide and the main block and slide them down.
The set pitch will be marked.
The stopper for the guide rule makes it easy to align the center of the board.
3x6 board 455 mm
1 m x 2 m board 500 mm
The center of the board can be set easily, so the pitch of the nails to be driven into the studs can be marked smoothly.
Five different pitches can be set.
Even pitching makes for a safe, secure, and sturdy building.

Screw Pitch Marking Tool Multi
Available for sale

Please visit our website for details: https://www.shinwasokutei.co.jp/english/

＃ScrewPitchMarkingTool #shinwa #DIY