How To Build an Portable RC ramp for less than $100

In this video I will show you how I built my multiple angle collapsible and portable RC ramp for less than $100.00
Materials needed and links to get them from Home Depot

you will need

4: 2 in. x 4 in. x 8 ft. #2 Prime Ground Contact Pressure-Treated Lumber
https://www.homedepot.com/p/WeatherSh...

1: 1/4 in. x 4 ft. x 8 ft. BC Sanded Pine Plywood
https://www.homedepot.com/p/1-4-in-x-...

1: Attic Pine Oriented Strand Board (Common: 5/8 in. x 2 ft. x 4 ft.
https://www.homedepot.com/p/Attic-Pin...

4: 3 in. Satin Nickel Square Corner Door Hinge
https://www.homedepot.com/p/Everbilt-...

3: 27 in. x 8 ft. Steel Lath
https://www.homedepot.com/p/27-in-x-8...

1: #7 x 2 in. Phillips Bugle-Head Coarse Thread Sharp Point Polymer Coated Exterior Screws
https://www.homedepot.com/p/Grip-Rite...

If you have any comments, suggestions or questions please leave them below