MOPARTS RACING Clutch System for Vespa Ciao / Bravo / Si / Citta

We have designed and produced our very own clutch system for PIAGGIO / VESPA CIAO / SI / CITTA

WHAT IS INCLUDED AND IS IT PLUG AND PLAY?
Yes! It is a plug and play system. All of the clutch's components, such as the bearing, oil seal, circlips, bushing and starter shoes, have already been installed by MOPARTS RACING.

This unique and state of the art clutch system consists of a CNC-machined clutch housing, also often referred to as clutch bell, a 51mm T10 front pulley, a T10 (12mm wide) belt and a T10 rear pulley in either of the following sizes:

- 57mm
- 70mm
- 83mm

HOW IS IT PRODUCED?
The MOPARTS RACING Clutch is manufactured out of one solid piece of steel. Original clutch bells are made using a die and mold.

However, by producing them out of one solid piece of steel, the structure is much stronger and there is no chance of the clutch exploding or tearing from internal cracks.

The pulley that mounts on to the backside of the clutch is pressfitted as well as bolted with four M4 bolts. The bolts lay flush in the bedding of the clutch's internal housing so not to interfere with the moving starter shoes.

WHAT ARE THE ADVANTAGES?
The advantages of the MOPARTS RACING Clutch System compared to a stock or normal clutch system with a regular belt and pulley are:

- No more belt slip
- Better acceleration and top speed, in part due to less belt slip (for example in humid or wet conditions)
- Decreased wear on the belt as the belt is set in a "timed" position, similar to a chain on a sprocket. The lack of belt slip means this belt will last a lot longer
- A clutch made out of one solid piece of steel. Regular clutches are made using a mold, meaning that they could crack, shatter or explode (as often is the case with the stock variomatic clutch bells)

For Piaggio / Vespa Ciao, Vespa Si, Vespa Bravo, Gilera Citta.

Direct link to part: https://www.mopartswebshop.com/mopart...

For custom parts visit our website: http://www.mopartswebshop.com