Rahasia Ubah Supply Non CT Menjadi CT yang Ampuh

Gimana sih cara untuk membuat Supply non CT menjadi CT
caranya sangat mudah sekali, kalian hanya perlu membagi 2 tegangannya bisa menggunakan resistor dan kapasitor.

This channel discusses problem solutions, especially in the fields of electricity, electronics, computers, internet networks. There is a problem, chat me in the link below....
You can also order electronic circuits or programs via the links below.....
If you have any questions please comment below, Don't forget to support this channel.....

My project
~ https://bekti.site/

Message :
~ WhatsApp : https://wa.me/message/LLT6OZL2GYDRK1
~ Telegram: https://t.me/MBektiW
~ Messenger Facenook https://m.me/muhamad.bekti.wibowo

social media :
~ Facebook :   / muhamad.bekti.wibowo  
~ Instagram :   / muhamad.bekti.wibowo  
~ Tik Tok:   / muhamad.bekti.wibowo  

Computer assembly
Below is an Example, as well as Computer Specs... what I currently have is fine for anything but not enough for use with 3D applications

My PC specs
~ Processor | Ryzen 5 3400G | OC Speed 4.250 Ghz 1.45 V | 4 Core 8 Treads
~ RAM T Force | 2x8GB | OC 3200 Mhz
~ Motherboards | ASRock B450 Steel Legend
~ VGA | IGPUs | RX-Vega 11 | OC Speed 1.7 Ghz 1.1 V | 2GB | Integrated
~ Hard Drives | Adata SX8200PRO | Read 3500MB/s, Write 3000MB/s | 256GB
~ Hard Disk Drives | WD Blue 2TB | 5400 Rpm | 145MB/s
~ Power Supply | Cooler Master Elite 500 V4 80+ | 500W
~ Fans | Deepcool X 12CM Fan - Black
~ bluetooth | Bluetooth 5.3 | 1Mbps
~ Intel WiFi 6E AX210 5374Mbps Tri-band 2.4G/5G/6Ghz
~ Casing | Cube Gaming
~ Monitors | LEDs 24" 24MP59 | 99% RGB 75hz
~ Monitors | LEDs 24" 24MP60 | 99% RGB 75hz