Build a Budget FoamCore Hobby Spray Booth for under $200

Building a foam core Spray Booth with 1/2" foam board. I built this Spray booth for under $200.
Screen shot the sketch for the plans

146 CFM exhaust fan: https://goo.gl/ic5zjW

You can buy a filter in any big box retailer or hardware store.

I got my foam core from my local Blick art supply store

White elmers glue here https://goo.gl/bYNjFi

I modify plans form www.vent-works.com

Contact me through www.botzen.com for design work,
you can follow me on:

Twitter: at   / botzendesign   (@botzendesign)
Facebook:   / botzendesign  
Instagram:   / botzendesign  

Botzen Design Inc.
Industrial Design and Product Visualization
http://www.botzen.com

0:00 Introduction
1:19 Vent Fan
1:23 Modify the plans!
1:38 Layout the plans
2:24 Testing the 14x 25 filter fit
2:44 Start assembly
3:00 Make things square
3:13 The back panel
3:56 Fan Unboxing
4:06 Fan test
4:15 Fan Install
4:29 Fan opening
4:47 Glue the Fan in place
4:54 Fan gussets
5:22 Top filter support
5:30 Adding LED's
5:44 Solder the leads
5:50 Switch and power connector
6:07 Installation
6:16 Tape the foam edges