Installing the Gyro Brake System with U-Brake

This videos shows the installation of the Gyro Brake system on a GT BMX bike.


The Gyro brake system includes the upper and lower cables, plates, bearing, u brake, cable hanger and adjusting barrel.

Hey guys, in this video you’ll find the installation of the Gyro brake system on a GT BMX bike.

Put grease to the frame fittings and then install the U brake.

Before tightening the bolts, you need to preload the spring tension. Hold the outer fitting by using a 13mm wrench, turn it clockwise and then tighten the bolt.

Do the same thing on the other side.

Remove the stem and install the plates, bearing and upper cables.

The lower plate is already installed on the bike, so all I need is to put in the bearing unit and then the upper plate and cables.

Insert the barrel, and finally, install the lower cables and connect the U brake with the cable hanger.



Track:
Far Away by Sarah Jansen   / sarahjansenmusic  
Creative Commons — Attribution 3.0 Unported — CC BY 3.0
Free Download / Stream: http://bit.ly/l-far-away
Music promoted by Audio Library    • Far Away – Sarah Jansen (No Copyright...  


#gyro #ubrake #bmx

Danyo Sports Channel Episode 107
Youtube:    / danyosports  
Reddit:   / danyosports  
Facebook:   / danyosports  
Instagram:   / danyosports  
Twitter:   / danyosports