Скачать или смотреть CReeves Makes DIY Side Table / Nightstand ep011

Howdy fellow makers and DIYers!

After completing our Pallet Feature Wall in our bedroom, it became evident that our makeshift end tables and current night stand were not going to cut it. We perused the vast realm of the internet and looked at what we would want in a nightstand. I then used SolidWorks to model up a version and started looking at my scrap wood pile. Luckily, I was able to source almost everything for these with the exception of finish and the hardware. The table is 27” tall x 14” deep x 16” wide.

After assembly, we sanded everything, applied primer and paint, and then I sprayed 3 coats of matte polycrylic for protection.

Let us know what you think! We love them.

Materials:=====================================
Base frame= Pine 1X lumber with Select 2X2 for the legs and craft edge glued tops (working on a budget)

Drawer: 1/2" plywood with 3/16" plywood bottom.

Social Life: ======================================================

Be sure to Like, Subscribe, and Follow me on the following social media platforms as well!

Facebook - www.facebook.com/creevesmakes
Instagram - www.instagram.com/creevesmakes
Twitter - www.twitter.com/creevesmakes

Music: ======================================================
"Leith Walk" and "Maniac" by Jahzzar
Licensed under Attribution-ShareAlike 3.0 International License. http://freemusicarchive.org/music/Jah...