How To Replace Rear Wheel Hub and Bearings 2007-11 Honda CR-V

Buy Now!
New Wheel Bearing & Hub Assembly from 1AAuto.com https://trq.video/ia-1ASHR00170

Not only can a worn wheel bearing or hub be annoying if it is noisy or vibrating, but it can also lead to accelerated wear in other parts, or unsafe driving conditions. Replacing your worn bearing or hub with a quality TRQ part is a safe, smart, decision. This video shows you how to do the replacement yourself on your 2007-2011 Honda CR-V.

• Check here for more videos on the 2007-2011 Honda CR-V    • Honda CR-V 3rd Generation 2007-2011  

This repair was done on a 2011 Honda CR-V EX 2.4L Sport Utility 4-Door and the process should be similar on the following vehicles:
2007 Honda CR-V
2008 Honda CR-V
2009 Honda CR-V
2010 Honda CR-V
2011 Honda CR-V

Tools you will need:
• Flat Blade Screwdriver https://trq.video/oue-1AXAA00013
• Impact Screwdriver https://trq.video/oE-1AXAA00047
• Phillips Bit in a Ratchet
• Pry Bar https://trq.video/ofH-1AXAA00020
• 18mm Wrench
• 10mm Socket https://trq.video/oqW-1AXAA00017
• 12mm Socket https://trq.video/ot7-1AXAA00015
• 17mm Socket https://trq.video/ot7-1AXAA00015
• 19mm Socket
• 36mm Socket https://trq.video/ox-1AAST00006
• Air Compressor
• Brake Caliper Compressor Tool. Single Piston. Lever Style. https://www.1aauto.com/*/i/1axaa00288...
• Brake Caliper Hanger https://trq.video/oaM-1AXAA00439
• 1/2 Inch Impact Gun https://trq.video/obx-1AXAA00252
• 1/2 Inch Breaker Bar https://trq.video/obE-1AXAA00078
• Ratchet https://trq.video/ovP-1AXAA00016
• Torque Wrench https://trq.video/onk-1AXAA00044
• Drill
• Center Punch https://trq.video/oa4-1AXAA00055
• Sledge Hammer

Subscribe:    / @trq  

Check out our playlist:
Honda CR-V 3rd Generation 2007-2011:    • Honda CR-V 3rd Generation 2007-2011  

⚠ DISCLAIMER:
While TRQ strives to make the information provided in this video as accurate as possible, it makes no claims, promises, or guarantees about the accuracy, completeness or applicability of the content. No information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. All do-it-yourself projects entail some risk. It is the sole responsibility of the viewer to assume this risk. TRQ is not responsible or liable for any loss damage (including, but not limited to, actual, consequential, or punitive), liability, claim, or any other injury or cause related to or resulting from any information posted in this video.