Скачать или смотреть Flywheel generator during work

A power generator that uses the forces of inertia to produce energy. The whole works on the principle of electromagnetic induction and a heavy flywheel, which is coupled with a DC motor, which drives the whole thing by means of a transmission belt, the energy for the motor comes from the coils inside the device, over which the neodymium magnets pass, polarized once NS and once SN ( copper coils are located between these magnets), which causes an alternating electric current in the coils, then this alternating current is directed to the rectifier bridges to establish the polarity for direct current, after obtaining direct current with chokes and capacitors, the current is received by the current motor and the energy system closes, if the device is correctly fitted and its parameters are ok, you should get enough energy to keep the device working automatically and the ability to power external receivers. It is also possible to use a Faraday disk instead of coils and rectify the current by means of bridges and electronic devices, which would allow to obtain a strong direct current of high intensity immediately, this solution would have advantages regarding the simplicity of such a device and would make this type of solution similar to the solutions of B. DePalma or other well-known inventors, whose works are currently discredited in terms of a strictly scientific and academic approach, but this does not mean that such solutions are not an alternative to ordinary generators, the greatest disadvantage of which is the need for continuous power supply by means of fuel combustion or atomic reactions. You be interested of reading this: https://www.gsjournal.net/Science-Jou...