How to Replace Camshaft Position Sensor 2003-2007 Honda Accord

Описание к видео How to Replace Camshaft Position Sensor 2003-2007 Honda Accord

Buy Now!
New Camshaft Position Sensor from 1AAuto.com http://1aau.to/ic/1ACPS00117

This video shows you how to install a new camshaft position sensor from TRQ on your 2003-2007 Honda Accord. For vehicles with electronically controlled timing, a camshaft position sensor relays important information to the computer to ensure the engine is running properly. A bad sensor may relay incorrect or no information, resulting in poor running conditions and trouble codes.

Estimated installation time for a professional technician is approximately: 3 hours 0 minutes

This repair was done on a 2006 Honda Accord EX 3.0L Sedan 4-Door FWD Automatic and the process should be similar on the following vehicles:
2003 Honda Accord
2004 Honda Accord
2005 Honda Accord
2006 Honda Accord
2007 Honda Accord

Tools you will need:
• 14mm Wrench http://1aau.to/oaiM/1AXAA00010
• 15mm Wrench http://1aau.to/oaiM/1AXAA00010
• 17mm Wrench http://1aau.to/oaiM/1AXAA00010
• 10mm Socket http://1aau.to/obRE/1AXAA00017
• 12mm Socket http://1aau.to/oci3/1AXAA00015
• 14mm Socket http://1aau.to/oci3/1AXAA00015
• 17mm Socket http://1aau.to/oci3/1AXAA00015
• 19mm Socket
• 8mm Socket http://1aau.to/obRE/1AXAA00017
• Pulley Removal Tool
• Trim Tool Set http://1aau.to/oaDt/1AXXX00006
• Ratchet http://1aau.to/ociZ/1AXAA00016
• Socket Extensions http://1aau.to/oci3/1AXAA00015
• Torque Wrench http://1aau.to/obmG/1AXAA00044
• Bungee Cord
• Cloth Rags http://1aau.to/oSU/1AXSS00035
• Marker / Writing Utensil
• Floor Jack http://1aau.to/oaFE/1AXAA00068
• Jack Stands http://1aau.to/oar8/1AXAA00065
• Wheel Chocks

Subscribe:    / @trq  

⚠ DISCLAIMER:
While TRQ strives to make the information provided in this video as accurate as possible, it makes no claims, promises, or guarantees about the accuracy, completeness or applicability of the content. No information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. All do-it-yourself projects entail some risk. It is the sole responsibility of the viewer to assume this risk. TRQ is not responsible or liable for any loss damage (including, but not limited to, actual, consequential, or punitive), liability, claim, or any other injury or cause related to or resulting from any information posted in this video.

Комментарии

Информация по комментариям в разработке