Low CG, Belly Dragger ultimate comp rc crawler overview

Low center of gravity scale trail rock comp crawlers. Modified Class 1 and Class 2 vehicles with impressive climbing and sidehilling performance with carbon chassis, transmission, bumpers, servo mount, transfer Buy it links: ⁃ SCX10 iii builder’s kit -https://snp.link/ab5dc96d
⁃ (2) AR44 universal axle - https://snp.link/d2ac68b4
⁃ Body mounts - https://snp.link/fc214079
⁃ WB driveshaft set (cutting is needed to get the correct length) - https://snp.link/0b11c563

*The SCX10 ii builder’s kit is not needed as the only remaining items from it were the driveshaft and body mounts that were used.

Ottsix tires - https://snp.link/72fcd27d
⁃ (2) Voodoo KLR 1.9/4.7 tires (red)
⁃ (2) 1.9 Halo WebWrap Foams (blue/red)
⁃ (2) 90mm Voodoo Scale shocks (42.5wt oil)
⁃ No slop shims

Robinson Racing Pinion - https://snp.link/3ed50486
⁃ 32p pinion gear 13T

Team KNK hardware - https://snp.link/f1a5e816
⁃ SCX10 ii stainless hardware kit
⁃ (4) 3x6 aluminium spacers (for shock mounting)
⁃ Aluminum body mounts (not installed yet)
⁃ * Consider buying bulk screws for future builds

Vanquish - https://snp.link/567df28b
⁃ (2) VP SLW 350 wheel hub
⁃ (2) Incision AR44 axle gear 30T/8T

SSD RC - https://snp.link/5f2556eb
⁃ Pro aluminum knuckles
⁃ Pro aluminum c hubs
⁃ Pro44 rear axle case
⁃ Pro44 HD metal diff cover (red)
⁃ Aluminum link mounts (black)

Proline Power Wagon - https://snp.link/734d5cc6
⁃ 1964 Dodge Power Wagon body

Tattu Battery - https://snp.link/075e056f
⁃ Tattu 11.1v 75c 3s 850mAH lipo w/XT60

https://gspeedchassis.com
⁃ GSPEED chassis TGH-V3 carbon rails
⁃ GSPEED chassis panhard mount
⁃ Team Garage Hack dual servo mount

https://hardcore-rc.ecwid.com
⁃ 70mm chassis braces
⁃ GSPEED V3 links
⁃ SCX10 ii offset panhard link

https://salinasdesignconcepts.com
⁃ ODT V1 - Complete Transmission w/skid plate (35% OD / 60T Spur)
⁃ Rock Slider battery tray (30mm / angled on a diet)
⁃ 3D printed flat bed (power wagon fit)

https://www.teamgaragehack.com
⁃ TGH DSM M1.5 spacers

https://www.3brothersrc.com
⁃ G13 direct power servo
⁃ 25T aluminum servo pinch-style horn
⁃ Yellowjacket 2000kv 14-pole non sensored brushless motor
⁃ 3s dual lipo no-solder servo and accessory connector - dual JST

https://www.beeftubes.com/store/c1/Fe...
⁃ Beef Patties brass hex style
⁃ SCX10 ii / AR44 Beef Tubes - brass - splined
⁃ SCX10 ii diff cover brass
⁃ SCX10 ii lower link / shock mounts - brass

https://home.castlecreations.com
⁃ Mamba micro X - sensored


https://www.fasteddybearings.com
⁃ (2) AR44 axle sealed bearing kit


Tech Factory Racing (Facebook)
⁃ 1.9 beadlock Carbon wheels


https://www.homedepot.com
⁃ Velcro Brand (extreme outdoor strip)



*If you do have the kit most items will transfer over to a GSPEED packaged deal that is offered. The only items needed in addition are the servo mount, servo mount spacer, panhard mount, electronic sliders, hardwareAmainhobbies parts - https://snp.link/a2827c5a
Castle Creations ESC and motors - https://snp.link/32e931ae
G-Speed LCG Chassis - https://gspeedchassis.com/
3 Brothers Racing - https://snp.link/09d54891
Holmes Hobbies - https://snp.link/3266cf93
Hardcore RC high clearance links - https://hardcore-rc.ecwid.com/
Salinas Design components - https://salinasdesignconcepts.com/
Beeftubes Brass - https://www.beeftubes.com/store/c1/Fe...
Team Garage Hack motor mounts - https://www.teamgaragehack.com/
Tech Factory Racing carbon wheels -   / techfactoryracing  
Bentmetal custom bumpers and body mounts -   / bentmetal-798536523527216  
Team KNK hardware - https://teamknkhardware.com/

Our local hobby shop, JJ Customs - https://www.jjcustomsllc.com/

Buy your kits and upgrade parts from this Amainhobbies link to support RC Review: https://snp.link/6640d084

Join the RC Review Facebook Group here:   / 302319827122846   for early videos and extra footage.