Emu SP1200 HxC Installation

How easy is it to install an SD card reader in your SP?

This easy.

There's more about configuring the HxC. Check the forums for this. I may do another vid on it.

You should wear a grounded wrist strap or be in contact with the metal case of some other grounded appliance. Don't touch the electronics like I do in this vid. Especially the chips.
Never have the lid off an appliance that's plugged in to the mains power. Use your brain. I am not responsible for what you do with this video.

Website:http://hxc2001.free.fr/
Sales:http://www.lotharek.pl/
Forum:http://torlus.com/floppy/forum/viewfo...
SP disk image can be obtained here:
hxc2001.free.fr/floppy_drive_emulator/QuickInstall_FloppyDiskImages.zip

Further notes:
Format your SD card to FAT32

You can configure the unit via the windows program "HxCFloppyEmulator software" or via the front panel of the device.
The windows program can be downloaded here:
http://hxc2001.free.fr/floppy_drive_e...
Important settings are Emu Shugart
and the bit rate needs to be set to... (will be back with this)