StroboStomp Mini Instruction Manual | Tune Screen | Part 1 | General Navigation

Any adjustment of the default settings of your StroboStomp Mini may be performed using the buttons located on either side of your tuner. Two Menu buttons, Up and Down, are located on the left side while two Value buttons, Plus and Minus, are located on the right side.

Momentary presses, or 'clicking', of the Up and Down Menu buttons will navigate to the parameter which you would like to adjust. These parameters will flash on the display as you pass through them. Once you arrive at the desired parameter, clicking the Plus or Minus Value buttons will increment or decrement the value of that parameter. 'Pressing and holding' either of the Value buttons will continuously and rapidly increment or decrement the value respectively until released. After adjusting a parameter value, the next press of either the Up or Down Menu button will confirm any changes or, inaction will end the parameter flashing and confirm any changes within a few seconds. If changes have been made, the Parameter icon will show on the display to indicate that changes have been made.


If no changes have been made to the flashing parameter value by use of the Value buttons, the parameter will continue to flash for a bit longer before ending. When an adjustable parameter is flashing, pressing the Menu up and value Plus buttons together will reset that parameter to its default value.

https://www.petersontuners.com/produc...