Скачать или смотреть Cold Jet Dry Ice Blasting Reduce Downtime - Clean polystyrene moulds and cavities.

Dry ice blasting is the most effective option available when it comes to cleaning polystyrene moulds on site without the risk of leaving residues, causing abrasion, or polluting the environment with harmful substances.

The magic of dry ice cleaning is that it is able to remove contaminants from moulds and tooling, even between the tightest of spaces, at varying tool temperatures and surface conditions.

The dry ice cleaning process is non-abrasive and does not produce secondary waste, which allows highly sensitive molds to be cleaned in a fraction of the time and for the cycles between preventive cleaning to be extended. In addition, moulds can be cleaned hot and online, without water or chemicals.

Cleaning with Cold Jet Dry Ice Blasting Technology Provides:

No secondary waste
Reduced cleaning time (up to 80%)
Increase in Quality standards
Clean in-place, no cooldown, with minimal disassembly
A non-abrasive clean that won’t damage substrates
Non-conductive process
Media entrapment elimination
Increased operator safety
An environmentally responsible clean

Cold Jet Australia Pty.Ltd.
1300 COLDJET ........... www.coldjet.com.au
P: +61 2 9600 9570...... [email protected]
-----------------------------------------------------------------------------------------------------------
QUESTION — Have a question about Dry Ice Blasting, How dry ice blasting works, Cleaning with dry ice, Dry Ice Production, or Anything Else? Post in the comments section of this video!

Subscribe to Cold Jet Australia TV Here:

http://bit.ly/ColdJetAustraliaChannel...

Cold Jet Australia on Linkedin:

http://bit.ly/ColdJetLinkedIn​​​