Repair of MOTU UltraLite with faulty LCD backlight

**NB1: It isn't necessary to completely disassemble your UltraLite if you only need to solder the 5V jumper wire between the main board and the LCD. Simply taking the top off might be enough. Watch the video and figure out how far you need to go.**

**NB2: Please look for the comment from F1 (pinned to the top) which explains the easy way to reassemble and get the power supply sub-board into place.**

This video shows how to disassemble a MOTU UltraLite and install a wire to feed 5 volt power to the LCD backlight, to make the display as bright as it should be. The video also shows how to get the UltraLite reassembled. Look for the pinned comment from F1 on reassembly. Enjoy. :-)