How to Set CRUISE CONTROL on Chevy Malibu (Chevrolet LT 2012 2011 2010 2009 2008 Set Operate Speed)

To set the cruise control on a Chevy Malibu, please follow these steps:
Start the vehicle and make sure you are in a suitable driving environment, such as on a highway or open road.

Accelerate to your desired cruising speed.

Locate the cruise control buttons on the steering wheel. Typically, there are buttons labeled "On/Off" or "Cruise" and buttons with arrows indicating "Set" and "Resume/Accel."

Press the "On/Off" or "Cruise" button to activate the cruise control system. You should see an indicator light on the instrument cluster that shows the cruise control is active.

Once the cruise control is activated, take your foot off the accelerator pedal and maintain your desired speed.

To set your current speed as the cruise control speed, press the "Set" button. The vehicle will maintain that speed until you manually cancel or adjust it.

If you need to increase your speed while the cruise control is engaged, press the "Resume/Accel" button. The vehicle will gradually accelerate to the previously set speed.

To deactivate the cruise control, either press the "On/Off" or "Cruise" button again or apply the brakes. The cruise control indicator light should turn off, indicating that the system is no longer active.

It's important to note that these steps may vary slightly depending on the specific trim level or optional features of your Chevy Malibu. Consult your vehicle's owner's manual for more detailed instructions and to ensure the accuracy of the information provided.