1971 Cutlass Ep 10 Cowl Replace & Rear Floor painting

This video feaures 3 areas of rust repair. First is sanding down the rear frame and floor area and painting it. This is followed uncovering some pretty bad rust on both inner and outer cowl panels, which get replaced with new full stampings from AMD. The passenger side cowl to rocker reinforcement panel gets repaired, while I fabricate and replace most of the one on the driver's side.

0:15 Sanding down and painting the rear frame and floor
6:31 Dissasembling and rebuilding the passenger's side cowl area
26:53 Dissasembling and rebuilding the driver's side cowl area
47:20 Outro with credits

Here's a link to my "1971 Cutlass" Playlist with all of the Cutlass videos:
   • Restomodding a 1971 Cutlass! Ep 01 Bu...  

Parts used from Summit Racing Equipment:
Auto Metal Direct Outer Cowl Panels 376-3468-R (Passenger's side):
https://www.summitracing.com/parts/AM...

Auto Metal Direct Body Inner Cowl Side Panels 376-3468-1R (Passenger's side):
https://www.summitracing.com/parts/AM...

Auto Metal Direct Outer Cowl Panels 376-3468-L (Driver's side):
https://www.summitracing.com/parts/AM...

Auto Metal Direct Body Inner Cowl Side Panels 376-3468-1L (Driver's side):
https://www.summitracing.com/parts/AM...

Although I did not purchase them (it would have taken too long to get them), the Cowl to Rocker Reinforcement panles are available. Please note, Summit Racing's website does NOT list these parts as fitting the Cutlass. My guess is they will fit with some minor modification:
RESTOPARTS® Supplied Cowl Reinforcement Panels M240189
https://www.summitracing.com/parts/op...

Music Credit:
"Rediscover (drumless)", "Not So Far Away", and "3033" written, performed, and produced by Aq Xico ‪@gobah‬ All used with permission.
From the YouTube Music Library:
“Heavy Petting” by Otis McDonald
“Jumpin’ Boogie Woogie” by Audionautix
“Calluses II” by William Rosati
“Beach Disco” by Dougie Wood
“Urchins” by Rondo Brothers
“Wolf Kisses” by Otis McDonand