Lithium Grid Charging via the 60Amp Meanwell Power Supply

How and Why we installed a comparatively cheap Constant-Current DC Switch Mode Power Supply instead of a Commercial Grid Charger.

0:00 Welcome!
0:27 Why not Solar?
2:57 Why the MeanWell RSP 750-15
4:21 Low/High Voltage
5:38 Adjustable Current Limiting
7:05 Safety Third Powering it Up
8:03 How the Controls are Wired
9:50 Connecting the SBMS0 to the Charger
11:18 Where I'm mounting it...
12:44 Connecting the Big Gauge Wire
14:52 Connecting it to the Charge Shunt
17:40 First Run... 60 Amps
18:35 Setting Up the SBMS I/O
19:44 Wiring the Connections to the SBMS
20:28 Later that same Evening
20:46 Testing that it shuts down properly...

This is the link to the Power Supply we bought:
https://www.mouser.com/ProductDetail/...

And this is the connector, normally used for through-hole PCB, But I found it easier to solder to than the wire crimp style:
https://www.mouser.com/ProductDetail/...


If you'd like to drop a few pesos in the Sombrero for Fuel or Camera Gear, please consider becoming a member of the channel. For more information Click Here: https://www.youtube.com/everlanders/join

Get a DJI drone here:
https://click.dji.com/AF7icN8Hg2BxV6X...