Quarq DZero Power Meter Spider: Installation

This video will guide you through the installation of a Quarq DZero Power Meter Spider on a Quarq Prime Power Ready crankset.
-----------------------------------------------------------------------------------------------------------
If you're new to power meters this article with help you out!
http://www.quarq.com/2017/02/09/using...
-----------------------------------------------------------------------------------------------------------
Interested in learning more about DZero this page has all the information!
http://www.quarq.com/dzero/
-----------------------------------------------------------------------------------------------------------
You will need the following tools and supplies:

5, 6, 8, and 10 mm hex wrenches
Rubber or plastic mallet
T20 TORX® driver (Included with a DZero Power Meter)
Isopropyl alcohol
Clean, lint-free shop towels
Cotton swabs
Torque wrench
T20 TORX® bit socket
5 mm hx bit socket
8 or 10 mm hex bit socket
Grease
-------------------------------------------------------------------------------------------------------------
TORX® is a registered trademark of Acument Intellectual Properties, LLC.