Скачать или смотреть CURA settings for ODIN 5 F3 3D Printer

CURA settings for ODIN 5 F3 3D Printer
Hello Everyone! Here is my Cura settings video for odin 5 f3 3D printer. I showed how to set up the printer in Cura itself and how to use slicing settings for the best quality prints. I used the everyones favorite crystal dragon as an example! At the end of the video you can see the results!

I suggested my personal parameter ranges so that you can use them as well. Let me know what you think in the comments down below. I hope this video helps you guys.

Here is the link for downloading the latest version of Cura software: https://ultimaker.com/software/ultima...

Here are my other Fokoos related videos and upcoming ones! ▬▬▬▬▬▬▬
Unboxing:    • Fokoos ODIN 5 F3 First Print, Leveling, As...  
How to fix the thermistor:    • How to fix thermistor error in FOKOOS Odin...  
Firmware update: coming soon
Cura settings video:    • CURA settings for ODIN 5 F3 3D Printer  
Full Review video: coming soon

For Start Gcode ----copy and paste below this line-----
G92 E0 ; Reset Extruder
G28 ; Home all axes

G1 Z2.0 F3000 ; Move Z Axis up little to prevent scratching of Heat Bed
G1 X0.1 Y20 Z0.3 F5000.0 ; Move to start position
G1 X2 Y200.0 Z0.3 F1500.0 E15 ; Draw the first line
G1 X1.6 Y200.0 Z0.3 F5000.0 ; Move to side a little
G1 X1.6 Y20 Z0.3 F1500.0 E30 ; Draw the second line
G92 E0 ; Reset Extruder
G1 Z2.0 F3000 ; Move Z Axis up little to prevent scratching of Heat Bed
G1 X5 Y20 Z0.3 F5000.0 ; Move over to prevent blob squish
For Start Gcode ----copy and paste above this line-----


For End Gcode ----copy and paste below this line-----
G91 ;Relative positioning
G1 E-2 F2700 ;Retract a bit
G1 E-2 Z0.2 F2400 ;Retract and raise Z
G1 X5 Y5 F3000 ;Wipe out
G1 Z10 ;Raise Z more
G90 ;Absolute positioning

G1 X0 Y{machine_depth} ;Present print
M106 S0 ;Turn-off fan
M104 S0 ;Turn-off hotend
M140 S0 ;Turn-off bed

M84 X Y E ;Disable all steppers but Z
For End Gcode ----copy and paste above this line-----

Link for crystal dragon: https://cults3d.com/en/3d-model/art/c...

Here is the website of Fokoos Tech: https://fokoos.com/
Here is FB support group for this printer:   / 4240701792613897  
Here is FB page for fokoos   / fokoostech  

Don't forget to follow your 3D Printing Doctor on Instagram for my prints and short videos:   / 3dprintingdoctor  

Here all my important links summarized: https://linktr.ee/3DPrintingDoctor

Let's discuss in the comments down below for more! Feel free to comment!

Last but not least, DON'T FORGET TO SUBSCRIBE :D

Thanks for watching!
#curasettings #odin5F3 #foldable3Dprinter

fokoos odin 5 f3 setup
fokoos 3d printer
fokoos odin-5 f3
odin 5 f3 cura settings