Samsung Gear S2 & S3 Watch reactivation lock removal

Download Link:
Samsung GEAR S3 S2 Bypass Remove Reactivation Lock

Content:
Repair Firmware
Combination files
Unlocking files
Wifi Net Odin
Supported Models:
SM-R600, SM-R765A
SM-R360, SM-R365
SM-R720, SM-R730A
SM-R730T, SM-R730V
SM-R732, SM-R735T
SM-R760, SM-R765
SM-R765N, SM-R765T
SM-R765V, SM-R770
SM-R775, SM-R775A
SM-R775T, SM-R775V

Putting your phone into Wireless download mode:

Turn off your Samsung Gear off.
Press and hold the Power key until REBOOTING displays at the bottom of the screen.
Press the Power key repeatedly until the Select REBOOT MODE screen displays.
Press the Power key to highlight ‘ Wireless Download mode’.
Press and hold the Home key to select.
Press two times so you get to a Screen to change to AP Mode.
Press power key to change to AP Mode.
Click on wifi connection on your computer and connect to your watch wifi.


GUIDE TO CONNECTING A SAMSUNG GEAR S2 AND S3 DEVICE USING WI-FI AND USB

https://electrovo.com/guide-to-connec...

Download PDF file:
https://electrovo.com/guide-connectin...

Instructions – Check video for more info:

Buy and Download the related model files
Put your phone into Wireless download mode
connect your phone with computer
Open WiFi_Net_Odin, Check you can see the ip that will appear on the WiFi_Net_Odin (if not so turn your windows firewall off)
Flash the Watch with Combination file
Connect your watch with same wifi Connected to computer
Note the IP in your watch
Go to - Setting - About - Turn on the Debugging mode
Open ansicon.exe
Run the related commands from Edit-IP-Run.bat into ansicon.exe as listed below: Below is a demo and the right code will be sent to you by email.
sdb connect 192.168.0.130:26101 - Here you need to put your IP Address of the watch
sdb root on
sdb push empty.bin /opt/usr/media/
sdb shell dd if=/opt/usr/media/empty.bin of /dev/mmcblk0p15
sdb shell reboot download
All Done, FRP removed
Rebote your Watch, and put it in wireless download mode
Connect it to the computer and use the WiFi_Net_Odin and Flass it with firmware
Your watch is now fully unlocked

RECOMMENDATIONS:

You will need to turn your computer firewall or antivirus firewall off for connection
If your watch “download wireless Mode” doesn’t work so you will need to connect your watch with “Download mode”
The “download mode” will require a wired connection so you will need to solder some wires according to this LINK for Samsung Gear S2 and this LINK for Samsung gear S3

Remotely:
We can setup a remote connection and perform the reactivation or you. That May cost.

Contact:
[email protected]
Skype: habib.anwari
Paypal link:
https://www.paypal.me/electrovo

Visit our Blog:
https://electrovo.com
   / anwarigroup  
Twitter:
  / abdul_habib_7  
Facebook page:
  / electrovofunpage