Jawa 350/639 - Carb Fuel Level Height Setup (HD)

If someone needs to check and/or reset the fuel level height in the carb of the Jawa 350/639, here is one of the many ways on how to do it. IMPORTANT - the carburetor in the video is a REPLICA.

Ak niekto potrebuje kontrolovat/nastavit vysku hladiny paliva v plavakovej komore, tak tu je jeden z mnohych sposobov ako na to. DOLEZITE - karburator vo videou je REPLIKA.

TOOLS:
- 13 mm wrench
- cross screw driver big and small
- pliers
- drain box
- water bottle
- special nut
- pile
- bearing ball
- hammer
- rod (for hammering the ball in)
- hose clamp or wire for it
- gloves

MATERIAL:
- new fuel needle valve
- new floating chamber sealing, if you like
- thread glue
- paper towels or a rag
- water


JAWA VIDEOS BEFORE:

Gasoline Tank Valve Upgrade
   • Jawa 350/639 - Gasoline Tank Valve Up...  

Speedometer gauge overhaul
   • Jawa 350/639 - Speedometer Gauge Over...  

RPM gauge tear down
   • Jawa 350/639 - RPM Gauge Teardown  

Mounting the engine together
   • Jawa 350/639 final engine mounting Pa...  

Mounting deadmass compensating panels
   • Jawa 350/639 engine mounting Part 1 (...  

Removing the crank, comparison btw. serial and sport crank
   • Jawa 350/639 engine dismounting Part ...  

Dismounting pistons and cut the engine in halves with a selfmade tool
   • Jawa 350/639 engine dismounting Part ...  

Dismounting primary gear and clutch
   • Jawa 350/639 engine dismounting Part ...  

Dismounting some basic parts, cleaning the engine
   • Jawa 350/639 engine dismounting Part ...  

Engine out of frame
   • Jawa 350/639 engine removal (no guide)  

#motorcyclevideos
#motorcyclerepairing
#motorcyclerestoration
#motorcyclerepair
#motorcyclemaintenance
#motorcycleromance