1982 CJ7 Overhaul Part 3 - In tank EFI fuel pump installation and body lift removal

In this video we install an in-tank high pressure fuel pump to support the fuel injected 4.0 engine that we have put in the CJ7. We make an adapter to allow a fuel sock to be installed on a 1/8 NPT fitting and then install the pump and fuel sock into the CJ7's 20 gallon fuel tank. If you are doing a EFI conversion and need the fuel sock to 1/8 NPT fitting that I made let me know and if enough people are interested I will make a few of these fittings. Before we put the fuel tank back we remove the 2 inch body lift that was installed on the jeep. Finally we sand blast and paint all the brackets in preparation of re-assembling the engine.

00:00 - Introduction
02:07 - Removing the fuel tank
06:18 - Fuel sock to 1/8NPT fitting
08:16 - Head unit modifications for glands and 6AN fittings
10:35 - Final fuel tank assembly
14:35 - Removing the 2" body lift
18:27 - Fuel pump testing and setting fuel pressure
21:38 - Sandblasting and painting engine parts