ARMORED DARKSEID

#photography #mcfarlane #actionfigures


This video focus in on the lighting for Custom Armored Darkseid. Paint apps will be in a later video.

Step 1
Drill into the neck straight into the torso cavity 1/8 bit
Carve a notch at the back of the neck for the wires to set against

Step 2
drill the eyes with vise drill

Step 3
fill perforation with UV resin to create a lens

Step 4
place nano LED in perforation and glue in using UV resin

Step 5
Cut the vest at the side and pull over the shoulders, cut a notch for the multi effect board in the mid back, counter sink it, make it flush / square . Drill a hole for the lead at the top left.
Glue with Fabri-tac ---let dry 24 hours

Step 6
attach the lead inside to the micro board and lights

Step 7
fold the vest over the multiword and Cut the openings for the controls
Glue the vest at the side only.

Step 8
attach the USB wire and reassemble your figure



list of materials

2 red nano LED
1 micro board
1 lead
1 multi effect board
1 usb wire
Fabri - tac glue
UV resin


Lights for LEGO
Briksmax / Amazon.com
leads and multi effects board

Lightmybricks.com
Micro board and lights



UV Resin - Hard Type Glue Transparent Ultraviolet Curing Resin for DIY Jewelry Craft Decoration Making - Crystal Clear Solar Cure Sunlight Activated Resin for Resin Mold, Casting and Coating - 60g https://www.amazon.com/dp/B07CVB2QW8/...





Sharing techniques to customize current action figures by painting or sculpting what is needed. Producing a figure the is either improved or just creating one from parts of other figures.



INSTAGRAM
photobella_photography

FACEBOOK
  / photobella.visual  



Not sponsord by any company, all items are purchused by me and and items are created by me. Any links shared are only to share information to other creators.