Скачать или смотреть Equipment Commissioning Checklist with eAuditor Audits & Inspections

Download eAuditor
Google Play : https://play.google.com/store/apps/de...
Apple App Store: https://apps.apple.com/us/app/eaudito...
https://eAuditor.app
Equipment Commissioning Checklist
An Equipment Commissioning Checklist created for eAuditor Audits & Inspections ensures that all steps and procedures for equipment commissioning are followed methodically. Below is a comprehensive template for commissioning general equipment, including mechanical, electrical, and other types of equipment. This checklist can be adapted to specific equipment as needed.

Equipment Commissioning Checklist

Equipment Commissioning Checklist
General Information
Project Name:
Location:
Equipment Type/Model:
Equipment Serial Number:
Commissioning Date:
Commissioning Team:
Engineer:
Technician:
Supervisor:
Inspection Date:
Inspection By:
1. Pre-Commissioning Checklist
1.1 Documentation Review
Installation manual provided.
Operation and maintenance manual available.
Commissioning procedure approved.
As-built drawings reviewed.
1.2 Physical Installation Check
Equipment correctly installed as per the manufacturer’s recommendations.
Equipment is free from any visible damage.
Correct equipment alignment verified (level, plumb).
All fasteners, bolts, and supports are tight and secure.
Safety covers, guards, or shields installed properly.
Area around the equipment is clean and free of obstructions.
1.3 Mechanical Inspection
All mechanical connections are secure.
Bearings lubricated as per manufacturer’s specifications.
Couplings aligned correctly.
Moving parts are clear of obstructions and move freely.
Gaskets, seals, and joints in place and undamaged.
1.4 Electrical/Instrumentation Check
Electrical connections verified and secure.
Electrical supply matches equipment requirements (voltage, phase, current).
Control panel wired correctly.
Overload protection tested.
Sensors (temperature, pressure, etc.) are installed and functioning.
All instrument calibration certificates are up to date.
1.5 Piping & Fluid Systems
Correct piping layout verified.
No visible leaks in the piping or connections.
Valves installed correctly (open/close as per instructions).
Pressure gauges and flow meters installed and operational.
Proper venting and draining arrangements in place.
2. Functional Testing Checklist
2.1 Initial Startup
Verify equipment start-up according to procedures.
Ensure equipment runs smoothly without any unusual sounds or vibrations.
Monitor power draw and match it to equipment ratings.
Observe the system for any visible or audible irregularities.
2.2 Performance Testing
Measure equipment output (pressure, flow, RPM, etc.).
Verify that equipment operates within the specified performance range.
Measure temperature rise and cooling efficiency if applicable.
Check for abnormal noise or vibration levels.
Compare performance results to design specifications.
2.3 Safety Systems Test
Emergency stop tested and functional.
Pressure relief systems tested.
All alarms and interlocks tested.
Verify automatic shutdown under fault conditions.
Test all safety sensors and switches.