Wind Speed Meter with Anemometer with NPN Pulse Output & Arduino

Register and get $100 from NextPCB:
https://www.nextpcb.com/register?code...

PCB Assembly capabilities info:
https://www.nextpcb.com/pcb-assembly-...

𝗣𝗿𝗼𝗷𝗲𝗰𝘁 𝗗𝗲𝘀𝗰𝗿𝗶𝗽𝘁𝗶𝗼𝗻:
In this guide, we will be interfacing NPN Pulse Output Anemometer Sensor with Arduino and measuring the Wind Speed. An anemometer is a device used for measuring wind speed and direction. It is also a common Weather Station instrument.

In one of our previous projects, we measured Wind Speed using the Adafruit Anemometer sensor & also display the Wind Speed in Gauge on TFT LCD Display. But Adafruit Anemometer is an analog anemometer and requires a power of more than 7V for operation. Therefore we will be using a digital Anemometer in this project which has NPN Pulse Output. The NPN pulse output anemometer result is good & are also cost-effective & they operate at 5V only.

In this project, we will interface NPN Pulse Output Anemometer with Arduino & display the measured wind speed on a 16×2 LCD Display. This anemometer is capable of measuring wind speeds up to 70 m/s or 156 mph which should be adequate for our location.

𝗪𝗿𝗶𝘁𝘁𝗲𝗻𝘁 𝗧𝘂𝘁𝗼𝗿𝗶𝗮𝗹: https://how2electronics.com/interfaci...
....................................................................................................................................................................................................................................

Drop a like if you liked this video.
Don't forget to subscribe to our channel for more Electronics projects and tutorials.

Website: https://www.how2electronics.com
Facebook:   / howtoelectronics  
Instagram:   / howtoelectronics  
Twitter:   / how2electronics