Part 2 Toyota Camry XSE 2019 sound system installed ! amps subwoofers capacitor MTXSE26 modded XV70

Part 2 Toyota Camry XSE 2019 sound system installed ! amps subwoofers capacitor MTXSE26 modded XV70

This is the second part of our sound system video install ..

The install was done by Sounds Only Garage in Corona and we are very pleased with the results. You can find them on Instagram for a quality install . The installer used quality wires and hardware . The wires were hidden very well and has an OEM look setup. The main power wire is a 2 gauge OFC which is a very thick wire to deliver proper power to the capacitor and amps.

Check out some comparison clips and bass sounds.

This video was made quick so we don't have much sound comparisons but we will try to put in more sound bytes in the future. The Kilmat which is compared to Dynomat sound deadens the trunk to prevent some rattle on the trunk area. Since the bass is powerful, a sound dampening material is necessary.



____________________________________________________________________________________________

From Part 1

We decided to use a sealed custom box for the Toyota Camry from Zenclosures to save space for the trunk. It goes all the way to the back and leaves about 28 inches from the front of the box to edge of the trunk. Sealed enclosures are more compact and will provide a crisper more accurate bass for a more dynamic sound experience inside the cabin. Ported boxes are nice also and produce more bass but it’s not something we’re looking for with this setup.

We’re gonna install Killmat 80 mil to prevent and minimize the rattles the subwoofers may cause ..


Here’s a breakdown of the parts installed.



Two 12 inch kicker Comp VR subwoofers
Zenclosure custom sealed speaker box
Skar Audio 1500w monoblock amp with bass knob
Skar Audio 500w 4 channel amp for interior
speakers
Skar Audio 6.5 components for fronts and rears with tweeters
Capacitor
LC7i
Killmat
Adapters for speakers
2 gauge wiring