how to program A toyota Vitz 2017 remote key fob

Описание к видео how to program A toyota Vitz 2017 remote key fob

how to program on toyota vitz remote key fob programming
in this vedio i will show you step by step instruction on how to program toyota Yaris.vits.corolla for any car same processes.
programming A remote manually for toyota most model. on board programming procedure.
1.start with the key out of the ignition.driver door is open all others closed and driver door is unlocked.

2.perform these steps within 5seconds.
A.insert the key into the ignition (do not turn )pull key out.
B.insert the key into the ignition (do not turn )pull key out.

3.perform these steps within 40seconds.
A.close then open the driver door.
B.close then open the driver door .
C.insert the key into the ignition (do not turn )pull key out .
4.perform these steps within 40seconds.
A.close then open the drivers door.
B.close then open the drivers door.
C.insert the key into ignition and leave it in ignition.
D.close the driver door.
E.turn the ignition to on (do not start)then back to off.
F.remove the key from the ignition.
5.within 3second the power door locks should lock then unlock automatically indicating successful entry into programming mode. return to step 1 if the lock do not cycle at this point.

6.perform these steps within 40 seconds.
A.press the lock and unlock button on the remote simultaneously for 1.5 second.
B.immediately after letting go of the lock and unlock button, press the lock button by itself and hold for 2 second. within 3second .the door lock should lock and the unlock onec indicating successful programming.
if the door locks cycle twice repeat steps A and B in step 6 as the remote was not accepted.
C.repeat steps A and B in step 6 for each new remote .

7.open driver door .

#toyota_key_programming#

Комментарии

Информация по комментариям в разработке