Pulse Motor Fine Tuning Improvements

Fine tuning improvements with some success drawing input current below milli amp into micro amp range Need microamp meter to read exact current draw by experimenting different coil design configuration. One coil 24awg size wounded in short turns to limit resistance which's connected in series with another coil 31awg coil with much larger turns to create high inductive spike. The non polarized capacitor 472uf 3kv has been replaced with a 0.022uf 3kv to match the frequency with the new coil configuration along with the driver circuit producing no heat loss, charging a 40vdc 68000uf capacitor which settles at 31.2 volts without load within the15 minute time frame, excluding using any pick up coils, transformers, etc.