DIY Hideaway Lights Installation Demo for 2019 Mercedes Sprinter Van

In this demo, we're showing how to install our LED HAW DUO hideaway lights within the taillights of a Sprinter van. The LED HAW DUO is available at www.WickedWarnings.com. The direct link to this product is included below.

First, you will have to remove the taillights by taking out the screws and adjusting the push locks. Once you bring the taillights over to your work area, you will take off the back panel by removing additional screws. Once you have the taillight in two pieces, you will select the area on the back of the lens to place your hideaway lights and drill a 1-inch hole for each hideaway. On this build, we've added two holes within the back of the lens for our amber and red alternating hideaway lights, though you can fit up to 3 hideaway lights within the Sprinter taillights.

**IMPORTANT: You should ONLY drill within the weather protected area of the back panel, so keep that in mind when drilling the holes for your wiring. This way, the factory gasket and weather protected area of the back panel will keep your wires safe from the elements.

Once these steps are completed, you can connect your wires and reinstall your taillight. This demo is featuring the popular LED HAW DUO hideaway lights by Wicked Warnings. For more details about this product, please visit www.WickedWarnings.com.

If you have any questions about this product or installing our hideaway lights in your vehicle, please send us an email at [email protected]. Be seen and be safe!

To see the hideaways in action, you can watch the completed build video here:    • 2019 Mercedes Sprinter Van LED Strobe...  

Products Featured:
LED HAW DUO - https://www.wickedwarnings.com/produc...

Contact Us:
[email protected]
https://www.wickedwarnings.com

Follow Wicked Warnings:
  / wickedwarnings  
  / wickedwarnings  
And remember to subscribe to our YouTube Channel to see our latest builds!