Falcon F16v5 Part 2: Connecting the Power Supply

Falcon F16v5 Assembly

This year I’m adding a new Falcon F16v5 pixel controller to my display.

In this video we demonstrate how to mount the power supply to a mountin plate, how to connect a power cord to the power supply, how to measure voltage output using a multimeter, and how to calibrate the power supply output.

Parts
Falcon F16v5 pixel controller
Enclosure - Cableguard (CG) 1500
Fan - Redux Noctua 80x80mm, 4 pin PWM, 12V; NOCTUA NF-R8 redux-1800 PWM (purchased from Amazon)
Bud IPV-1116, Large Air & Moisture Vent
Meanwell 350LRS-12 (purchased from Holiday Lighting)
APC Surge Protector for Ethernet Data Port (10/100/1000 Base-T Ethernet lines), ProtectNet (PNET1GB) (Amazon) x2
Blue Spades Terminals
12AWG Black Wire
12AWG Red Wire
Inline Fuses 12AWG with 20 AMP fuses
F16 mounting plate and hardware
PG21 Waterproof Cable Gland x3
PG13.5 Waterproof Cable Gland x1
CAT5 Bulkhead Controller Housing Extension Cable x2
1” vent (Maurice Franklin Louver-1" Round White Polypropylene Plastic Louver with Insect Screen System)
“Tailpipe” - 2 Way 3/4" 45 Degree Elbow PVC Fitting
ConnectX female pigtail x15
Power Cord
Wire for hanging controller

Tools
Phillips screw driver
Small Flat head screwdriver
Power Drill/screwdriver
Assorted drill bits, spades, hole borers
Wire Cutters
Crimping Tool (for terminal spades)
Wire Strippers
Multimeter
Magnifying glass