How to use MTN PRO Frosted Glass Effect Paint

The MTN PRO Frosted Glass Effect is a decorative paint that gives a translucent white appearance to all types of glass and transparent surfaces such as methacrylate.
This paint is useful for painting the windows of bathrooms, medical offices, changing rooms and other places where privacy is needed. The result, which mimics the effects of acid on glass, is resistant to subsequent daily cleaning.

- Translucent
- Waterproof
- Strong adhesion
- Very fast drying

0:06 Wear gloves and a mask

0:15 Clean the surface with MTN PRO Ethyl Alcohol 70%
Mark off the area you want to paint using masking tape

0:34 Shake well for one minute

0:38 Try out the distance and flow of the paint on a test surface

0:45 Spray holding the can as upright as possible, making sure to cover the entire surface

0:56 Apply two thin coats, leaving 10 minutes between coats
The frosted effect will appear as the product dries

0:35 Touch dry after 10 minutes
Totally dry after 2 hours

1:01 Once finished, clean the nozzle by holding the aerosol upside down and pressing down until only gas comes out. If the nozzle is clogged, just replace it with a new one.

You can write to our technical department with any questions or doubts: [email protected]

Recycle - Repair - Repaint - Reuse!