Venoxy custom gauge faces and instrument LED install on a 90-93 VFR750 RC36 3rd Gen VFR

Описание к видео Venoxy custom gauge faces and instrument LED install on a 90-93 VFR750 RC36 3rd Gen VFR

*Update* Do not use an LED for the Low fuel warning light. Use one of the bulbs there. Make sure and set the tachometer needle to zero as shown in the video. Do not set it to -1 like you need to on some other bikes. Be careful to not push the needles too far down or they will hit the gaugeface and not sweep correctly. Make sure the screws on the electrical connections are tight. They are part of the electrical circuit. I also went back and put some electrical tape in between the tach and speedo to help with some of the light bleed on the speedometer.

Venoxy custom gauge faces and Super Bright LEDs

Комментарии

Информация по комментариям в разработке

Похожие видео