How to Replace Upstream O2 Oxygen Sensor 2013-2018 Toyota RAV4 2.5L L4

Buy Now!
New O2 Oxygen Sensor from 1AAuto.com https://trq.video/ib-1AEOS00271

This video shows you how to install new TRQ oxygen sensors on your 2013-2018 Toyota RAV4 2.5L L4. The Oxygen (O2) sensors help monitor the emissions system in your vehicle. They measure the amount of oxygen passing through the exhaust, which informs the computer about proper fuel/air mixture, and the condition of the catalytic converter. Over time, the sensors may fail due to contamination, or reaching the end of their service life. TRQ offers new O2 sensors made to manufacturer’s specifications.

Estimated installation time for a professional technician is approximately: 1 hour 30 minutes

This repair was done on a 2015 Toyota RAV4 LE 2.5L Sport Utility 4-Door AWD Automatic and the process should be similar on the following vehicles:
2013 Toyota RAV4
2014 Toyota RAV4
2015 Toyota RAV4
2016 Toyota RAV4
2017 Toyota RAV4
2018 Toyota RAV4

Tools you will need:
• Pocket Screwdriver
• 22mm Wrench
• 12mm Socket https://trq.video/ocwr-1AXAA00015
• O2 Sensor Socket
• Ratchet https://trq.video/ocwb-1AXAA00016
• Copper Anti-Seize
• Gloves https://trq.video/obJf-1AXSS00048
• Safety Glasses

Subscribe:    / @trq  

⚠ DISCLAIMER:
While TRQ strives to make the information provided in this video as accurate as possible, it makes no claims, promises, or guarantees about the accuracy, completeness or applicability of the content. No information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. All do-it-yourself projects entail some risk. It is the sole responsibility of the viewer to assume this risk. TRQ is not responsible or liable for any loss damage (including, but not limited to, actual, consequential, or punitive), liability, claim, or any other injury or cause related to or resulting from any information posted in this video.