Скачать или смотреть OTE in RSLogix 500 English | Output In PLC | Etc. Electrical & Automation

Hello Engineers Radhe Radhe!
Welcome to my youtube Channels
In this video I have discussed about OTE(output Energize) in RSLOgix 500 in plc


1) First video
   • RSLogix 500 English | RSLinx Classic | RSL...  

2) Second Video
   • RSLogix 500 English Full Explaination In H...  

3) third Video
   • How to Communication B/w RSLogix 500 Engli...  

4)Fourth Video
   • NO in PLC in Hindi | What is NO in PLC | N...  


5)Fifth Video
   • NC in PLC in Hindi | What is NC in PLC | N...  

6)sixth video
   • What is Rung and Power Rail in PLC? |   Et...  




This instruction sets the specified bit when rung continuity is achieved (rung goes true). Under normal operating conditions, if the set bit corresponds to an output device, the output device will be energized when the rung goes true.

If you are using a 5/02, 5/03, 5/04, 5/05 or MicroLogix processor, you can use indexed addresses. If you are using a 5/03 OS302, a 5/04 OS401, or a 5/05 processor, you can use indirect addresses.

Output addresses are specified to the bit level.

Warning! Never use an output address at more than one place in your logic program. Always be fully aware of the load represented by the output coil.

Addressing Help:
In an output address, such as O:4/03:

"O" indicates output image table

"4" represents slot four (decimal)

"03" represents bit three

Note: Slot 0 is reserved for the processor.



#facebook
#fb
#facebookpage
#fbpage
#posts
#youtube
#youtubegrowth
#yt
#plc
#scada
#electrical
#engineering
#rockwell
#rockwellautomation
#automation
#ladderlogic
#programmer
#programming
#programmablelogiccontroller
#panel
#hmi
#vfd
#allenbradley
#rslogix
#rslogix500
#rslogix500english
#rslinx
#rslinxclassic
#controllogix
#compactlogix
#controller
#electronics
#engineer
#engineering








plc,
plc programming,
plc output module,
digital output in plc,
plc basics,
analog output,
plc tutorial,
plc output types,
plc input output modules,
plc input output mapping,
plc inputs and outputs,
analog output in plc,
plc training,
siemens plc,
output,
plc hardware,
types of digital output in plc,
output module,
input and output addressing in plc,
digital inputs and outputs in plc,
sinking and sourcing in plc,
plc output wiring,
input output card plc
digital output in plc,
plc,
digital output,
plc programming,
plc training,
plc digital output wiring,
plc digital output types,
plc digital input and output,
plc output module,
plc digital input and output devices,
what is digital output in plc,
types of digital output in plc,
plc inputs and outputs,
digital input and output in plc,
plc digital inputs,
digital input and output,
what is digital input and output in plc,
digital inputs and outputs in plc
analog output,
analog input,
analog output in plc,
plc,
analog output module,
plc analog output,
plc analog output wiring,
siemens plc analog output,
analog input output example,
analog input and output examples,
siemens s7 analog input output tutorial,
analog,
plc analog input,
analog input and output in plc,
analog input output sample,
analog output program,
analog input output signals,
s71200 tiaportal analog output,
s7-1200 analog output 0-10 v