Скачать или смотреть IPG LightWELD - Fanuc CRX Wire Welding Bronze

Wire welding is no problem on the LightWELD using the LightBOT AP and Fanuc CRX co robot system. Wire speed is set directly from the Fanuc tablet and a variety of wire feeders can be set up and selected.

On this weld we are using a Binzel wire feeder with analog input. Wire welds can be terminated with no divot technology recently introduced by Serra Laser. Perfect start and stops, easy restarts, and no hassle set up. On this weld the Fanuc CRX speed is set at 45 cm/min (about 18 ipm) and wire speed is set at 100 cm/min to allow more wire to be fed into the weld - building a bigger fillet.

Fanuc CRX can be added to any LightWELD system that has been delivered - no matter the age. Easy on and off allow the user to hand LightWELD or switch to co robot LightWELDing in under 5 minutes.

Serra Laser Center
1740 N. Orangethorpe Park
Anaheim, CA 92801
714-680-6211
Serralaserstore.com
Info@serralaser.com