Orbit B-Hyve Smart Indoor/Outdoor Sprinkler Timer Installation and App Pairing

Amazon Affiliate Links:

(Shown in video) Orbit B-hyve Smart 6-Zone Indoor/Outdoor Sprinkler Controller -
https://amzn.to/3sedC1X

Orbit B-hyve Smart 12-Station Indoor/Outdoor Sprinkler System Controller - https://amzn.to/3sm8iJM

Orbit Amazon Store -
https://amzn.to/3Mt8tKf

iFixit Manta Tool Kit -
https://amzn.to/49p49p0

(Used to shoot video) Apple iPhone 14 Pro Max, 128GB, Deep Purple - Unlocked (Renewed Premium) -
https://amzn.to/3u5IH8z

Amazon and the Amazon logo are trademarks of Amazon.com, Inc. or its affiliates.

Video of a step by step installation of the Orbit B-Hyve Wifi Timer and App installation and set up on a newer iphone 14 Pro Max

Orbit B-Hyve Smart Indoor/Outdoor Sprinkler Timer Installation and App Pairing

Materials Required:
B-hyve Smart Indoor/Outdoor Sprinkler Timer for 6 stations
Screwdriver
Mounting hardware
Wi-Fi network and password

Installation Steps:
1. Preparation:
Read the Manual: Start by carefully reading the provided manual or instructions that come with the B-hyve timer.
2. Location Selection:
Choose the Installation Spot: Select a location indoors or outdoors (if it's designed for outdoor use) near a power outlet and close to your sprinkler system. Ensure it's protected from weather conditions if installed outside.
3. Mounting the Timer:
Mounting Process: If the timer comes with a mounting bracket or needs to be affixed to a surface, use the provided hardware to securely install it. Ensure it's firmly attached to the wall or designated surface.
4. Connecting to the Sprinkler System:
Wiring the Stations: Identify the wiring from your existing sprinkler system. Connect the wires from each zone or station to the corresponding zones on the timer. The zones should be labeled (usually 1, 2, 3, etc.).
5. Electrical Connection:
Power Supply: Plug in the timer to a power outlet. Make sure it's in a location where it can be plugged in without being obstructed.
6. Wi-Fi Connection and Setup:
Wi-Fi Connectivity: Power on the timer and follow the instructions to connect it to your Wi-Fi network. Usually, this involves using a smartphone app and following the in-app instructions to connect the timer to your home network.
7. Setting Up the B-hyve App:
Download and Configure the App: Download the B-hyve app on your smartphone. Follow the app's instructions to set up your account and link the timer to the app. This will allow you to control and program the timer remotely.
8. Program and Test:
Programming Zones: Use the app or the interface on the timer to program watering schedules for each zone. Test the system to ensure the zones are watering as per your programmed settings.
9. Troubleshooting and Calibration:
Fine-tuning: If necessary, consult the troubleshooting section of the manual for guidance. Calibration might be required for accurate watering schedules.
10. Final Checks:
Double-Check Everything: Ensure all the connections are secure, the timer is functioning correctly, and the zones are watering as intended.
The installation process for the B-hyve Smart Indoor/Outdoor Sprinkler Timer should be quite straightforward following these steps. Always refer to the specific manual provided with the timer for any manufacturer-specific instructions or troubleshooting advice.