How to Replace CV Axle Shaft 2007-2015 Mazda CX-9

Buy Now!
New CV Axle Assembly from 1AAuto.com http://1aau.to/ib/1AAXS00199

This video shows you how to install a new CV axle shaft in your 2007-2015 Mazda CX-9. A CV axle has flexible joints. Often, these joints wear out, or seize from contaminants due to the protective boot tearing open. A worn joint is prone to breakage, or other hazards. If your vehicle needs a new CV axle, install a quality TRQ axle that is engineered to your vehicle’s specifications.

This process should be similar on the following vehicles:
2007 Mazda CX-9
2008 Mazda CX-9
2009 Mazda CX-9
2010 Mazda CX-9
2011 Mazda CX-9
2012 Mazda CX-9
2013 Mazda CX-9
2014 Mazda CX-9
2015 Mazda CX-9

Tools you will need:
• Flat Blade Screwdriver http://1aau.to/obcf/1AXAA00013
• Pry Bar http://1aau.to/oNH/1AXAA00020
• 14mm Wrench http://1aau.to/oRv/1AXAA00010
• 21mm wrench
• 10mm Socket http://1aau.to/oaXZ/1AXAA00017
• 14mm Socket http://1aau.to/obgU/1AXAA00015
• 17mm Socket http://1aau.to/obgU/1AXAA00015
• 18mm Socket http://1aau.to/o9L/1AXAA00043
• Locking Pliers http://1aau.to/ojN/1AXAA00139
• Needle nose pliers http://1aau.to/oAA/1AXAA00051
• Needle nose pliers http://1aau.to/oAA/1AXAA00052
• Straight Cutters
• 1/2 Inch Impact Gun http://1aau.to/op8/1AXAA00252
• Ratchet http://1aau.to/obrE/1AXAA00016
• Socket Driver
• Socket Extensions http://1aau.to/obgU/1AXAA00015
• Torque Wrench http://1aau.to/oavv/1AXAA00044
• Center Punch http://1aau.to/okf/1AXAA00055
• Floor Jack http://1aau.to/oWj/1AXAA00068
• Hammer http://1aau.to/oQo/1AXAA00091
• Jack Stands http://1aau.to/oPz/1AXAA00065
• Rubber Mallet http://1aau.to/of9/1AXAA00413
• Wheel Chocks

Subscribe:    / @trq  

⚠ DISCLAIMER:
While TRQ strives to make the information provided in this video as accurate as possible, it makes no claims, promises, or guarantees about the accuracy, completeness or applicability of the content. No information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. All do-it-yourself projects entail some risk. It is the sole responsibility of the viewer to assume this risk. TRQ is not responsible or liable for any loss damage (including, but not limited to, actual, consequential, or punitive), liability, claim, or any other injury or cause related to or resulting from any information posted in this video.