How to install our Air to Oil Cooler on the MKV Toyota Supra

Shop our aftermarket parts catalog: https://www.verus-engineering.com/

Follow us on social!
Verus Engineering Sub Reddit:   / verusengineering  
Verus Engineering Reddit User Account:   / verusengineering  
Facebook:   / verusengineering  
TikTok:   / verusengineering  
Instagram: https://www.instagram.com/verusengine...
Twitter:   / _verus_  

For additional comments, questions and concerns, please e-mail us at [email protected].

High Temp Bleed Procedure:

(b) Open the bleeder screw on the radiator reserve tank assembly for the high-temperature coolant circuit and close it again after approx. 10 s.

(1) You can close the bleeder screw prior to expiry of the 10 s once coolant escapes.

(c) Close the reserve tank cap sub-assembly on the radiator reserve tank assembly of the high-temperature cooling circuit.

(d) Make sure the bonnet is closed.[*1]

(e) Make sure that the wheels touch the ground.[*2]

(f) Engage the parking brake.[*3]

(g) Engage into both "P" or "N" automatic transmissions.[*4]

(h) Press the START-STOP button (engine switch) 3 times within 0.8 seconds to enter Diagnostic (PAD) Mode.[*5]

(i) Turn on low-beam headlight and the hazard warning light.[*6]

HINT:

If the low-beam headlights and hazard warning lights are not switched on, the engine switch off automatically after a certain period of time and interrupt the bleeding procedure.

(j) Adjust the heating to maximum temperature and adjust the blower to the lowest stage.[*7]

(k) Hold the accelerator pedal down for at least 10 s at limit position and do not step onto the brake pedal.[*8]

(l) Start engine.[*9]

(m) The cooling system bleeding routine has been started, pay attention to the display on the instrument cluster (KOMBI). ("Service function started")[*10]