Basic Ethernet Communications with EBPro Weintek Multi-HMI Connection

Weintek USA official site - http://www.weintekusa.com
Call for pricing and availability 425-488-1100

Chapter 21. Ethernet Communication and Multi-HMI Connection (EasyBuilder Pro - EBPro).

0:00 - Introduction
0:28 - Setting the PLC's IP address
2:13 - Setting the HMI's IP address
3:28 - Examples
4:54 - Remote HMI Communication
10:45 - Demonstration

There are two ways of Ethernet communication:
* Use RJ45 straight through cable and hub.
* Use RJ45 crossover cable and without hub, but this is limited to point-to-point connection (HMI to HMI or PC to HMI).

Through Ethernet network, the system provides the following methods for data transmission:

* HMI to HMI communication.
* PC to HMI communication.
* Operating the PLC connected to another HMI.

Note:
Remote HMI in a cMT-SVR project must be a cMT-SVR machine. Thus, a cMT-SVR cannot communicate with PLCs connected with other series, such as eMT, mTV-series.

#WeintekUSA #MultiHMIconnection #BasicEthernet