Скачать или смотреть etrailer | All About the Convert-A-Ball Interchangeable Ball Set

Click for more info and reviews of this Convert-A-Ball Trailer Hitch Ball:
https://www.etrailer.com/Trailer-Hitc...
Check out some similar Trailer Hitch Ball options:
https://www.etrailer.com/dept-pg-Trai...

https://www.etrailer.com
Don’t forget to subscribe!
   / etrailertv  

Full transcript: https://www.etrailer.com/tv-Demo-Conv...
Today we're going to be taking a look at the convert a ball, interchangeable ball set. Changing out your convert a ball for another ball size is very easy. All you have to do is pop out the integrated pin, just like this. Pop out the integrated pin and then you can replace the ball with any size convert a ball trailer hitch ball. This kit's going to come with one extra long shank and two heavy duty interchangeable hitch balls. It's also going to come with your split lock washer, your nut and a cotter pin. It's very easy and quick to change out the hitch ball.

It's going to come with a 1 7/8 inch ball and a 2 inch ball. To put the ball back on you want to pop out that pin. It's got internal seals in there. Creates a nice water tight connections to keep moisture, dirt and grim from getting caught in there. It's going to prevent build up of that stuff. Place it on, push the pin through, it's going to lock into place. The unit's going to feature a nice steal construction.

It's going to feature a nonelectric, nickel platting technology that's going to produce a strong protective finish. That's an eco friendly platting method that's going to be less harmful to the environment when compared to traditional methods. It does come with the split lock washer and nut. The torque rating can be found in the included instructions and again, it's also going to include your cotter pin. This would get installed here at the bottom. It's got a small area right there for this to go through and then get bent over. The parts made right here in the USA.

It's going to fit ball mounts with a 1 inch diameter ball hole and a draw bar fitness or platform fitness of 1 1/8 of an inch to 2 inches. If we take a measurement of the shank diameter, you can see that's going to measure right around one inch. The shank link, measuring from the bottom of the platform to the end of the threaded portion is going to be about 3 1/8 of an inch. To the very end of the unit's about 3 7/16 to 3 1/2 inches long. The unit's going to feature a towing capacity of 10,000 pounds.

That's going to do it for today's look at the convert a ball interchangeable ball set.