Как заменить модель насоса Grundfos CR 32-90, A–B (1 камера)

See how a Grundfos service specialist changes Grundfos CR 32-90 pump model A to B (1 chamber) and find out what the job requires and how it is performed.

The different sections include:
00:00 Introduction
00:10​ Removing the coupling and motor
02:17​ Removing the shaft seal and dismantling the chamber stack (model A)
05:13​ Assembling the chamber stack (model B)
08:36​ Removing the bottom bearing
10:46​ Fitting the chamber stack and shaft seal
14:37​ Fitting the motor and coupling

Learn more about CR pumps, spare parts, service kits and additional services and solutions provided by Grundfos on https://product-selection.grundfos.co... and do not hesitate to contact us via http://www.grundfos.com/pleasecallus.

DISCLAIMER
This service video provides “how to” guidance for Grundfos products and is aimed only at skilled, trained personnel.

N.B. Any stricter local health and safety regulations and requirements take precedence over this guidance.
The video and any information in it is provided on an “as is” basis and without any liability and/or warranty to the extent permitted by applicable law.

Grundfos reviews and updates the information provided on a regular basis. However, instructions may have changed since publication of this video and therefore please always check the latest Service Instructions and the Installation & Operating Instructions of the related product.

These documents can be found on https://product-selection.grundfos.co...

#pumpservice​ #pumprepair​ #grundfospumps​ #grundfosservice

Recorded: January 2014