Easy DIY Solar Panel Install - 8.37kW Enphase Energy Micro Inverters & Mission Solar Panels

PLEASE SUBSCRIBE TO MY CHANNEL
One Year Review Video -    • DIY SOLAR - 1 YR Review Enphase Energ...  
How to Design Your System -    • DIY SOLAR - How to Design Your System...  

Video outlining installation of my PV solar array using 27 ‪@EnphaseEnergy‬ IQ7+ Microinverters & 310w ‪@missionsolarenergy2072‬ Panels. Also purchased the Enphase IQ Combiner Box. Each Microinverter can put out 1.21amps of 240v power, for total incoming power of almost 33amps at 240v.

Racking is home made from lumber, panels are mounted to unistrut. Installed at 22 degree tilt angle and 200 degree azimuth angle.

During August, generated almost 49 kwh in a day, but have been averaging around 40kwh per day.

Total system materials cost was around $13,200. I had almost 100 man hours for installation.

0:00 Overview of System to Be Installed
1:15 Foundation Layout
4:18 Ready for Concrete
7:16 Concrete Poured
8:29 Rafters Installed
8:45 Info on Solar Panels & Equipment
10:15 Unistrut & Inverters & Q Cable
16:07 IQ Combiner Box
20:50 Emergency Disconnect & Garage Subpanel
22:00 Emergency Disconnect Wiring
25:11 Solar Panel Mounting Hardware
28:16 Installing Panels
28:50 Panels Installed, Array Overview & Lessons Learned
33:28 Grounding
35:05 Subpanel & Labeling
35:52 Net Meter & Power Generation

Ground Rod Driver Bit: https://amzn.to/3NaqcEy
The BEST Work Gloves: https://amzn.to/3QIKmYv