MATLAB Simulation of Voltage Sag Mitigation During Faults Using UPQC | Voltage Sag Mitigation

MATLAB Simulation of Voltage Sag Mitigation During Faults Using UPQC | Voltage Sag Mitigation
===========================================================
Purchase Link for this model:
For Indian Customer:
https://www.itpes.net/product-page/ma...
For International Customers other than India
https://www.lmssolution.net/product-p...

Mitigate the Voltage Sag under Faults using UPQC

The main purpose of a UPQC is to mitigate current harmonics and voltage harmonics. It has the capability of improving power quality at the point of installation on power distribution systems. The video discusses the compensation principle and different control strategies of the UPQC in detail. The performance of UPQC is examined by considering, a diode rectifier feeding an RL load (nonlinear load) that acts as a source of harmonics, feeding harmonics into the three-phase distribution system of concern. The performance is also observed under influence of fault conditions in utility side disturbances such as voltage sag. This control strategy guarantees sinusoidal, balanced, and minimized source currents even under unbalanced and/or distorted system voltages. The control strategies for UPQC are modeled using MATLAB/SIMULINK and simulation results are presented to validate the proposed control strategy.

============================================================
You can download a MATLAB file from the following Website;
Mitigate the Voltage Sag under Faults using UPQC


Whatsapp: https://wa.me/917904458501
Whatsapp @ +917904458501

https://www.itpes.net/contact
https://www.lmssolution.net/contact

Kindly subscribe to my channel.

Register online course on "MATLAB Modelling of Solar PV system":

https://www.itpes.net/online-course
https://www.lmssolution.net/online-co...

The Course on "MATLAB Modelling of Solar PV system explore about following;
1. MATLAB modelling of Solar PV cell and Solar PV Array Using a mathematical equation.
2. How to find I-V and PV Characteristics of the modelled solar PV array in MATLAB.
3. MATLAB Implementation of Maximum Powerpoint Algorithm for solar PV array with a stand-alone system.
4. MATLAB Implementation of solar MPPT charger controller for a solar PV system.
5. MATLAB Implementation of a grid-connected solar PV system.

MATLAB Files included:
Modelling of Solar PV Array

MPPT control of Solar PV Array

MPPT charger controller

Grid-connected solar PV system

Any comments, suggestions for improvements and feedback relevant to this online course and videos can submit via the following link:

https://www.itpes.net/contact
https://www.lmssolution.net/contact

#MATLAB #VoltageSag #UPQC #PowerQuality #FaultMitigation #Simulink #ElectricalEngineering #PowerSystem #VoltageStabilization #Simulation #ControlSystems #PowerElectronics #VoltageControl #GridStability #RenewableEnergy