Bxpanded Piranha Tooth Bar Install on 1025r John Deere

Описание к видео Bxpanded Piranha Tooth Bar Install on 1025r John Deere

NOTES ON TOOTH BAR INSTALL

I had to hammer in the arms a bit for fitment of the 53” John Deere option. I was 1/8” off. It can be a 1/4” small and still work. I think I prefer it tight so I’m grateful how I got it. There is variation in 1025r bucket size so measure well. Their width was dead on 53”.

I used a 11/16” bit vs 3/4” recommend in the instructions. That’s one size up from the bolt size
A sharpie marker worked good for marking the hole.

There customer support was helpful and easy to get a hold of

I still suck at digging, but this should help some. Not really night and day difference based off one use.

Комментарии

Информация по комментариям в разработке

Похожие видео