How to replace the Outer Tie Rod 2013-2018 Nissan Altima 🚗

Find the parts used in the video on CarParts.com just there https://carparts.solutions/ALTIMA
Over 1 million auto parts at your fingertips, download our app 🤖 https://carparts.solutions/AppGooglePlay or 🍎 https://carparts.solutions/AppIOS

⚙️ NEEDED CARPARTS AND PRODUCTS
Outer tie rods : https://carparts.solutions/OuterTieRo... and https://carparts.solutions/OuterTieRo...

Penetrating oil : https://carparts.solutions/Penetratin...

Silicone grease

💪 TIGHTENING TORQUES
Tie rod end holding nut : 25 Ft-lbs

🛠 TOOLS
The toolbox recommended by CARPARTS.COM to repair your Nissan Altima :
https://carparts.solutions/ToolBox

List of the tools we used to replace the outer tie rod on a Nissan Altima :
Hydraulic jack : https://carparts.solutions/FloorJack
Jack stands : https://carparts.solutions/JackStands
Wheel lug wrench
Wire brush
Marker
22mm wrench
21mm wrench
Ratchet
19mm socket
Ball joint puller
Hammer
Caliper
17mm socket
Torque wrench :
20 to 250 Ft-lbs https://carparts.solutions/TorqueWren...
100 to 600 Ft-lbs https://carparts.solutions/TorqueWren...

Don't forget to subscribe :    / @carpartscomofficial  

🛻 COMPATIBLE VEHICLES
The operation and tools displayed in the video should be available on the following vehicles :
2013 Nissan Altima
2014 Nissan Altima
2015 Nissan Altima
2016 Nissan Altima
2017 Nissan Altima
2018 Nissan Altima

📽 🛠 USEFUL VIDEOS 🛠 📽
How to jack your Nissan Altima :    • How to jack your Nissan Altima safely...  

⚠️ CARPARTS.COM'S INFOS
During this operation, you will work on the steering system of your vehicle. A professional alignment check should be performed to ensure that your steering system is once again perfectly adjusted and functioning.

The components to be removed are very often seized up, so don't hesitate to brush and to use penetrating oil to make removal easier.

🚨 DISCLAIMER
This video is for entertainment purposes only. Carparts.com, Inc. disclaims all damages including, but not limited to, actual, consequential, and/or punitive, for any liability, claim, or any other injury or cause related to or arising from any information or lack thereof posted in this video. No information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. All mechanical car projects entail some risk. It is the sole responsibility of the viewer to assume this risk. If you are in doubt, please consult a licensed mechanic in your area.

📚 CHAPTERS
0:00 Intro
0:10 How to pull up your Altima
0:48 Loosen the locknut
1:31 Remove the outer tie rod from the steering knuckle
2:04 Remove the outer tie rod
2:29 Change the locknut
3:07 Replace the outer tie rod + Tightening torques
4:24 Tighten the locknut
4:34 Put your Altima back on the ground