Connecting to Wires X with Yaesu SCU-57 - Step by Step!

We'll guide you through every step of connecting your Yaesu FT-5DE to Wires X using the SCU-57 cable. Whether you're a seasoned ham or just starting out, this video will provide you with clear, easy-to-follow instructions and tips to ensure a seamless setup.

Products Showcased:

SCU-57 Kit: https://www.hamradio.co.uk/yaesu-scu-57
FT-5DE: https://www.hamradio.co.uk/ft5
HRI-200: https://www.hamradio.co.uk/yaesu-hri-...
FT4XE: https://www.hamradio.co.uk/yaesu-ft-4...
ZUMSPOT-RPI: https://www.hamradio.co.uk/zumspot-rp...

00:00 - What is Wires-X?

02:47 - WiresX Registration
https://www.yaesu.com/jp/en/wires-x/r...

05:28 - Finding Radio ID

06:46 - Drivers for SCU-57
https://www.prolific.com.tw/UserFiles...

08:30 - SCU-57 Kit Overview
https://www.hamradio.co.uk/yaesu-scu-57

10:50 - Putting FT5 into Digital Mode

12:00 - Common Audio Issue Fix

13:23 - Setting Up Wires-X Software

14:15 - Connecting To Rooms

15:27 - Summary

Find below instructions for configuring the FT5D with Wires-X:

Firmware Update:
- Ensure FT5D is running the latest 1.11 firmware.
- If not, update using the provided USB cable (not SCU-57), external SAD PSU, download Yaesu USB drive, and Firmware update program.
- Slide the switch upwards to the main firmware update position.

Network Configuration:
- Internet Router and PC must have uPNP enabled for Wires-X software.
- If uPNP is not enabled, open and assign Ports 46100, 46110, 46112, 46114, 46120, and 46122 to the IP address of the host PC.

WiresX Registration:
- Navigate to the WiresX registration website: WiresX Registration.
- Register your email and callsign.
- Wait for a confirmation email directing you to the registration page.
- Obtain the Radio ID from the radio (not the serial number).

Waiting Period:
- Wait 1-2 weeks until Yaesu WiresX emails you with DTMF User ID & DTMF Node ID.

Driver and Software Downloads:
- Download SCU-57 Prolific driver from Yaesu: SCU-57 Driver or from Prolific: Prolific Driver.
- Download WiresX PDN software from Yaesu: WiresX PDN Software.

FT5D Configuration:
- Enable Wires-X mode on FT5D by switching off the radio, holding the WiresX button & the button above, and turning the radio back on.
- Connect SCU-57 digital USB cable to PC & Radio.

Audio Configuration:
- Ensure the target Windows PC has an external Microphone & Headset Jack.
- If not, the Wires-X software may not work.
- Use a USB headset or a USB to analogue adapter if needed.

Wires-X Software Setup:
- Start Wires-X software and enter Radio ID, User ID & Node ID.
- If an error message appears (‘no audio device detected’), plug in a USB headset or a jack plug to the PC Microphone socket.

Connectivity:
- Connect to the America link to begin, as it is very active.
 
NOTE: In PDN mode, a Room CANNOT be hosted; to host a Room, HRI-200 needs to be purchased.
 
Using Wires-X is NOT the same as using a Hotspot & YSF, this is real Yaesu hosted Wires-X, not 3rd party YSF
 
Feel free to reach out if you have any questions to [email protected]

Ham Radio Store: http://www.hamradio.co.uk/
Like us on Facebook:   / hamradiouk  
Follow us on Twitter: @HamRadioUK   / hamradiouk