I made my own DIY 4 tire inflation system, here's how!!!

Today I make my own DIY 4 tire inflation system. I couldn't stomach the $200 or more for some of these inflation systems, so like many of you I decided to make my own. Amazon, get ready!!!

This is a bit of a long video with lots of detail to help you out if you'd like to duplicate my efforts. If you don't want to watch through the whole thing I will tell you that I feel it was a big success!! For about $125 using all great components it will air down my 33's from 38psi to 15psi in about 3 1/2 minutes, and with my Maxi Trac compressor it will air them back to 38psi in just a tick over 3 minutes. Yeet!!

Here's a list of all the pieces I used to complete this, all purchased from Amazon. Youo can absolutely do this cheaper with different components. Cheaper hose, simpler fittings etc you can likely get in for under 100 bucks, this is just the selections I felt good about.

Flexzilla 1/4" hose: (qty 1)
https://smile.amazon.com/gp/product/B...

Flexzilla 1/4" hose ends: (qty 4)
https://smile.amazon.com/gp/product/B...

Wynnsky air hose fittings:(qty 1)
https://smile.amazon.com/gp/product/B...

Hex Manifold: (qty 1)
https://smile.amazon.com/gp/product/B...

AstroAI closed system tire fittings: (qty 1 box of 4)
https://smile.amazon.com/gp/product/B...

Barbed "Tee" fittings with hose clamps: (qty 1 box of 2 "tees")
https://smile.amazon.com/gp/product/B...

Winters 60psi 1/4" center/back air gauge: (qty 1)
https://smile.amazon.com/gp/product/B...

1/4" ball valve: (qty 1)
https://smile.amazon.com/gp/product/B...

14" NPT elbow to mount the air gauge: (qty 1 pack of 2, but only 1 elbow is required)
https://smile.amazon.com/gp/product/B...