Dayton 24" 2-Speed Oscillating Industrial Pedestal Fan

A Dayton 24" 2-speed oscillating industrial/commercial pedestal fan. This unit was originally a wall mount mode, which would give it the model number of 4C2T9. The fan itself independent of configuration is model number 3C215B. The motor is model number 4C354C. The unit likely dates back to the later 1980s.

This one could use new blades and bearings. The guard is in excellent condition, but unfortunately there is some type of overspray caked onto the motor and blades which will likely be very difficult to get off. The power factor is extremely low for a PSC motor, a new capacitor may also be in order.

These were excellent fans, extremely powerful yet very quiet. The blades were very steeply pitched and only run at 1,075 RPM, throwing lots of air with little noise.